Van Den Bosh F3D Pipes

Van Den Bosh designed F3D muffled pipe.

Callow Pipes NOW IN STOCK!

Stock has arrived of the Chris Callow designed F3D muffled pipe. This is a new improved version of what Chris used to win the 2011 World Championships.

Same inside as the very popular V4-M but with the finned header section for extra strength and cooling!

Machined from bar stock alloy... This engine pan for MB Profi has much stronger threads and will suit most F3D Aircraft...

With F5D Electric Pylon being revamped in Australia by Big Bruce Racing this battery pace is suited to the conditions that are required for optimal performance within the 1000 Watt limit allowed by the class...

F5D 1800 5S 40C

EF1 (Electric Formula 1) is fast becoming popular in Australia and promises to attract new blood and old to the class for simple, fun pylon racing... This battery is suited to give enough performance over the full race distance without adding too much weight...

EF-1 2650 4S 30C

EF1 (Electric Formula 1) is fast becoming popular in Australia and promises to attract new blood and old to the class for simple, fun pylon racing... This battery has a bit of extra capacity and also suits the EF1 class nicely...

Suit Nelson and Jett engines  Standard coil designed for use up to 15% nitro.

Spinner nut $25
Stainless steel shaft $20
Balanced spinner backplate for most models that don't need extended length $50

Ask about a package deal price for these parts when purchased with some props by e-mailing Bruce on bdechastel@bigpond.com

Spinner nut $25
Stainless steel shaft $20
Balanced extended backplate for Voodoo NXT and Evo Next $45

Ask about a package deal price for these parts when purchased with some props by e-mailing Bruce on bdechastel@bigpond.com

Glow Plugs

Nelson Style Glow Plug with Extra Heavy Duty 0.25mm wire coiled element (Glow-Bee Style)

Big Bruce Racing has commissioned "Merlin Glow Plug Manufacturer" to create his own heavy duty Glow-Bee style plug for the use in Racing engines...

These plugs will suit MB Profi, Jett .40 Q500 & QM Engines, Nelsons etc...

This version of the Merlin Glow Plug is only available through Big Bruce Racing...

Race Glow Driver

Glow Driver to suit heavy duty and standard Glo Bee style plugs / Supplied with Glow Leads

Big Bruce Prop Balancer

CnC Machined Alloy Prop Balancer with very strong magnets to support the balance shaft...

Balance Shaft has special adaptors that fit the Big Bruce Racing Carbon Fibre Props for better support in the balancer... 

12mm MB Profi Venturi

CnC Machined Alloy 12mm Venturi to suit MB Profi F3D Engine...

Carbon Landing Gear

Carbon Fibre Landing Gear (Spats around wheels) to suit QM40 Polecat...

QM40 and Q500 Carbon Landing Gear

Carbon Fibre Landing Gear to suit QM40 and Q500 Aircraft... (No Spats)

Wing Mounted Carbon Landing Gear

Carbon Fibre Landing Gear to suit QM40 Loki and all Big Bruce Racing F3D Aircraft...

MB Profi Engine Pan

Cast alloy engine pan for MB Profi to suit most F3D Aircraft...

Q40 Engine Mounts

Machine bar stock mount for Q40
Suits Nelson & Jett Engines...

Engine Mount Rings

7075 Aluminium, Tapped 6-32, Q-40 suits Jett Mount...

FAI Muffled Pipe V4-M

New - V4-M muffled pipe with welded on nipple...

FAI Muffled Pipe V3-M

V3-M muffled pipe... Spun aluminium...

FAI Standard (Non Muffled) V3 & #8 Pipes

FAI Pipe #8 Spun Alloy...

FAI Pipe V3 Spun Alloy...

Moulded Hub Carbon Prop

Carbon Fibre moulded hub props to suit F3D and F400 Aircraft...

Carbon Prop

For use with F3D and F400.
Note this is the same blade as the moulded hub prop but with the conventional hub.
Constructed of 100% carbon and heat cured resin...

Tachometer

Great Taco, also caters for your 2, 3 and 4 bladed sport models. Works great with Carbon props at over 30,000 RPM...

Voltage Regulator

5.9 Volt reg for running 2 cell Li Poly batt for RX power. Super light system. Supplies constant power to RX and servos under all conditions... Suit Big Bruce Racing Lipo RX Battery...

Lipo RX Battery

800ma 2 cell Lipo battery for use with voltage regulator to power receiver and servos, Only 42g with balance lead and universal JR/Futaba power lead...

JETT Fuel Tanker

For JETT or Tettra Bladder Tanks...

JETT CG Slimline Bladder Tank

For those models that have limited area to mount your fuel tank... This tank will allow you to fit it right on your CG for better balance the whole race...

Tetra Bladder Tank

5 oz Tetra Bladder Tank for bubble free fuel under high vibration conditions...

Other sizes available upon request...

JETT Spinners

For 40 size Jett or Nelson engines (Balanced)...

Streamline Wheels & Axles

Streamline Wheels and Axles to suit Carbon Landing Gear... Suit Polecat and Q500 Models...

Alloy Axles

New light weight aluminium wheel axles,
specially designed for use with carbon landing gear.

Torque Wrench

Now available, Torque wrench for head bolts and glow plugs etc...

Specialised Verniers

Machined base added to measure piston position
easier than standard verniers.
Also comes with .200" ring for more accurate
measuring on Nelson and Jett 40's.
( removes the piston lock at top dead center
by placing the ring under the sleeve)